Karnage Welder w/Kold Tip & NOCO Charger & X-Connect Male Plug

Description

The Karnage Welder is a self-contained, battery powered portable flux core wire feed welder. You can weld with .030 and .035 wire. You will typically get about 15 minutes of trigger time, approximately a 60 inch bead depending on wire speed and other factors.

Features:

• Included is a NOCO Genius5 5A 100/240V smart charger with the X-Connect male cigarette lighter plug.  This charger will properly charge your internal AGM batteries and helps maintain your welder’s batteries after each use.
• Internal batteries for quick and easy set up, no removing your vehicle’s batteries to weld.
• Standard wire feed style torch, get into those tight spaces with ease.  Standard Tweco style tips available from most every welding supply store.
• Fully portable.  Open the lid, flip the switch and start welding. No pulling batteries.
• Kold Tip circuit means no unintentional arcing and easy staging for the perfect repair.
• Circuit breakers to prevent internal damage.
• The Karnage Welder comes to you fully charged and ready to weld with a 2 Lb. spool of .030 flux core wire.

OPTIONAL ITEMS:

All the optional items listed below come with a discount over buying them separate from a welder.

• Need to charge in your vehicle or camper?  Add on the 200W inverter and use your NOCO charger wherever you go to charge your welder on the go.  The inverter also includes USB charging ports to charge your important gadgets.
• Consumables; Each welder comes loaded and ready to weld and 2 additional spare .030 tips.  This spare consumable kit comes with 20 tips, 2 tip holders and a spare nozzle cover to keep you going for a long long time.  Do a lot of welding?  Upgrade to the Consumable Carrier which comes fully loaded with 20 tips, 2 tip holders, 1 shields, and 2 2lb spools of wire.  And for your welding goggles this kit includes 10 goggle lens covers and 2 2450 batteries all in a convent, secure, sealed waterproof kit.
• Karnage Kables; If your internal batteries become depleted and you still have more welding to do you can connect two external batteries.  Handy if you really have a big repair or multiple repairs.
• Karnage Kage; Secure your welder in your rig from damage and theft with the Karnage Kage.  Bolt or weld it in place and lock it up.
• Auto Darkening Goggles w/mask are light weight and small enough to store in your glove box or welding tool kit.  Auto darkening with weld, cut and grinding modes.  Always remember to use proper PPE when welding!
• Optional Accessories;
  • 14″ leather gloves that keep the heat away from hands.  Always remember to use proper PPE when welding!
  • 6 in 1 multi use welding pliers & wire brush.  Basically the tools you need to maintain your welding in the field!
• Extra Spool;  One spool typically lasts a half dozen or so full charge cycles but your never know when your gonna run out.  Always a good idea to carry a spare just in case.
• Lastly, grab a stylish Karnage Welder t-shirt, zipper or pullover hoodie and hats.

Quick start guide:

1. Open the case
2. Pull out the torch and ground
3. Connect ground to work surface near where you are welding
4. Flip switch to UP position (LED Volt meter will light up)
5. Loosen the spool brake (we tighten it down so the spool does not unwind when in transport)
6. Set wire speed
7. WELD!

Downloadable Owner’s Manual

Basic Operating Instructions Video

Basic Charging Instructions Video

Internal battery specs Mighty Max ML22-12